Terminal Server IOLAN SDSC Rack
Terminal Server Série à Double Ethernet

- 8, 16 ou 32 ports série RS232/422/485 par sélection logicielle
- Double adaptateur Ethernet 10/100/1000 avec la Technologie Redundant Path
- Fonctions de sécurité avancées pour le cryptage des données, l’authentification des utilisateurs et la gestion des évènements
Pour les applications de connectivité série-Ethernet, le Serveur de Terminaux IOLAN SDSC (également utilisable comme Console Server ou Device Server) est le produit le plus avance du marché pour les applications série à Ethernet.
Offrant la performance la plus élevée en rack 1U, l’IOLAN SDSC est un matériel robuste, flexible et compatible IPv6 destiné aux applications de capture de données, de surveillance ou de communication avec des équipements série distants. Disponibles avec 8, 16 ou 32 ports RJ45, les IOLAN SDS sont parfaitement adaptés aux besoins de toutes vos applications série. Le double Ethernet intégré et la Technologie Redundant Path de l’IOLAN SDSC permettent un accès permanent aux ports série, en faisant la solution la plus fiable de connexion d’équipements RS232, RS422 ou RS485 distants sur Ethernet… Le tout pour le prix le plus compétitif du marché.
Les Terminal Servers IOLAN SDSC sont idéaux pour:
- Les ingénieurs et chefs de projet ayant besoin d’une interface série à Ethernet de haute performance pour des équipements série RS232 ou RS485
- Les environnements dans lesquels les liens réseaux redondants permis par l’interface Double Ethernet revêtent une importance critique
Pourquoi les Terminal Servers IOLAN SDSC sont le choix de prédilection:
- La technologie TrueSerial® permet les connexions série sur Ethernet les plus authentiques
- Les ports série universels RS232/422/485 (EIA-232/422/485) par sélection logicielle vous protègent de falsifications mécaniques sur le terrain
- Processeur 32 bits* cadencé à 400 MHz, affichant une puissance de 750 MIPS, accompagné d'un coprocesseur de cryptage, pour le meilleur rendement disponible
- Clustering – Regroupement des ports de console hors bande pour un aperçu global unique. Idéal pour les grands centres de données
- Power Cycling intelligent des équipements avec les Remote Power Switch Perle
- Support IP de nouvelle génération (IPv6) pour la compatibilité de votre réseau et la protection de vos investissements
- Fonctionnalité hôte principal/secondaire, pour un basculement automatique sur hôte alternatif en cas de panne de la connexion TCP principale
- Ports série RJ45 à brochage Cisco pour l’utilisation avec les câbles CAT5 «enroulés»
- EasyPort Web – Accès aux ports console série par navigateur Internet compatible Java
- DNS dynamique – Accès à la gestion de chaque console de n'importe quel point sur Internet
- Accès par navigateur sans Java aux ports de consoles série éloignées via Telnet et SSH
- Garantie à vie – pour la meilleure protection de l'investissement disponible sur le marché actuel
Software Features - IOLAN SDSC Dual Ethernet RS232 / RS485 / RS422 Terminal Server
Serial Port Access | |
---|---|
Connect directly using Telnet / SSH by port and IP address | |
Connect with EasyPort menu by Telnet / SSH | |
Use an internet browser to access with HTTP or secure HTTPS via EasyPort Web menu | |
Java-free browser access to remote serial console ports via Telnet and SSH | |
Ports can be assigned a specific IP address ( aliasing ) | |
Multisession capability enables multiple users to access ports simultaneously * | |
Multihost access enables multiple hosts/servers to share serial ports | |
Accessibility | |
In-band ( Ethernet ) and out-of-band ( dial-up modem ) support | |
Dynamic DNS enables users to find a console server from anywhere on the Internet | |
Domain name control through DHCP option 81 | |
IPV6 and IPV4 addressing support | |
Availability | |
Primary/Backup host functionality enables automatic connections to alternate host(s) | |
Security | |
SSH v1 and v2 | |
PCI DSS Compliance: TLS v1.2, TLS v1.1, TLS v1.0, SSL v3.0, SSL v2.0 | |
SSL Server and SSL client mode capability | |
SSL Peer authentication | |
IPSec VPN : NAT Traversal, ESP authentication protocol | |
SSH ciphers: AES-CTR, AES-GCM and ChaCha20-poly1305 | |
SSL encryption: AES-GCM, key exchange ECDH-ECDSA, HMAC SHA256, SHA384 | |
Encryption: AES (256/192/128), 3DES, DES, Blowfish, CAST128, ARCFOUR(RC4), ARCTWO(RC2) | |
Hashing Algorithms: MD5, SHA-1, RIPEMD160, SHA1-96, and MD5-96 | |
Key exchange: RSA, EDH-RSA, EDH-DSS, ADH | |
X.509 Certificate verification: RSA, DSA | |
Certificate authority (CA) list | |
Local database | |
RADIUS Authentication, Authorization and Accounting | |
TACACS+ Authentication, Authorization and Accounting | |
LDAP, NIS, Kerberos Authentication | |
RSA SecureID-agent or via RADIUS Authentication | |
SNMP v3 Authentication and Encryption support | |
IP Address filtering | |
Disable unused daemons | |
Active Directory via LDAP | |
Terminal Server | |
Telnet | |
SSH v1 and v2 | |
Rlogin | |
Auto session login | |
LPD, RCP printer | |
MOTD - Message of the day | |
Serial machine to Ethernet | |
Tunnel raw serial data across Ethernet - clear or encrypted | |
Raw serial data over TCP/IP | |
Raw serial data over UDP | |
Serial data control of packetized data | |
Share serial ports with multiple hosts/servers | |
Virtual modem simulates a modem connection - assign IP address by AT phone number | |
Virtual modem data can be sent over the Ethernet link with or without SSL encryption | |
TruePort com/tty redirector for serial based applications on Windows, Linux, Solaris, SCO, HP UX, NCR UNIX and AIX. For a complete list of all the latest drivers click here | |
"TrueSerial packet technology provides the most authentic serial connections across Ethernet ensuring serial protocol integrity" | |
RFC 2217 standard for transport of serial data and RS232 control signals | |
Customizable or fixed serial baud rates | |
Plug-ins allow customer or Perle provided plug-ins for special applications | |
Software Development Kit ( SDK ) available | |
Serial encapsulation of industrial protocols such as ModBus, DNP3 and IEC-870-5-101 | |
ModBus TCP gateway enables serial Modbus ASCII/RTU device connection to ModBus TCP | |
Data logging will store serial data received when no active TCP session and forward to network peer once session re-established - 32K bytes circular per port | |
Console Management | |
Sun / Oracle Solaris Break Safe | |
Local port buffer viewing - 256K bytes per port | |
External port buffering via NFS, encrypted NFS and Syslog | |
Event notification | |
Manage AC power of external equipment using Perle RPS power management products | |
Clustering - central console server enables access ports across multiple console servers | |
Windows Server 2003/2008 EMS - SAC support GUI access to text-based Special Administrative Console | |
Remote Access | |
Dial, direct serial | PPP, PAP/CHAP, SLIP |
HTTP tunneling enables firewall-safe access to remote serial devices across the internet | |
Automatic DNS Update | Utilize DHCP Opt 81 to set IOLAN domain name for easy name management and with Dynamic DNS support , users on the Internet can access the device server by name without having to know its IP address. See Automatic DNS update support for details |
IPSEC VPN client/servers | Microsoft L2TP/IPSEC VPN client ( native to Windows XP) |
Microsoft IPSEC VPN Client ( native to Windows Vista ) | |
Cisco routers with IPSEC VPN feature set | |
Perle IOLAN SDS/STS and SCS models | |
OA&M ( Operations, Administration and Management ) | |
SNMP V3 - read and write, Perle MIB | |
Syslog | |
Perle Device Manager - Windows based utility for large scale deployments | |
Configurable default configuration | |
Installation Wizard | |
Set a Personalized Factory Default for your IOLANs | |
Protocols | |
IPv6, IPv4, TCP/IP, Reverse SSH, SSH, SSL, IPSec/IPv4, IPSec/IPv6, L2TP/IPSec, CIDR, RIPV2/MD5, ARP, RARP, UDP, UDP Multicast, ICMP, BOOTP, DHCP, TFTP, SFTP, SNTP, Telnet, raw, reverse Telnet, LPD, RCP, DNS, Dynamic DNS, WINS, HTTP, HTTPS, SMTP, SNMPV3, PPP, PAP/CHAP, SLIP, CSLIP, RFC2217, MSCHAP |
* Available on 2 and 4 port models
Hardware Specifications
IOLAN SDS8C | IOLAN SDS16C | IOLAN SDS32C | |
---|---|---|---|
Processor | MPC8349E, 400 Mhz, 750 MIPS | ||
Memory | |||
RAM MB | 64 | 64 | 128 |
Flash MB | 16 | 16 | 16 |
Interface Ports | |||
Number of Serial Ports | 8 | 16 | 32 |
Serial Port Interface | Software selectable RS232 / RS485 / RS422 DTE on RJ45 - RS485: full and half duplex | ||
Sun / Solaris | Sun / Oracle ‘Solaris' Safe - no "break signal" sent during power cycle causing costly server re-boots or downtime |
||
Serial Port Speeds | 50bps to 230Kbps with customizable baud rate support | ||
Data Bits | Configurable for 5,6,7 or 8-bit protocol support Use TruePort to transparently pass 9-bit serial data |
||
Parity | Odd, even, Mark, Space, None | ||
Flow Control | Hardware, Software, Both, None | ||
Serial Port Protection | 15Kv Electrostatic Discharge Protection (ESD) | ||
Local Console Port | RS232 on RJ45 with DB9 adapter (provided) | ||
Network | Dual 10/100/1000-base TX ethernet RJ45 | ||
Software selectable Ethernet speed 10/100/1000, Auto | |||
Software selectable Half/Full/Auto duplex | |||
Power | |||
Power Supply | USA - IEC320-C13 to NEMA 5-15P line cord UK - IEC320-C13 to BS1363 line cord EU - IEC320-C13 to CEE 7/7 Schuko South Africa - IEC320-C13 to BS546 line cord Australia - IEC320-C13 to AS3112 line cord |
||
Nominal Input Voltage | 110/230v AC | ||
Input Voltage Range | 100-240v AC | ||
AC Input Frequency: | 47-63Hz | ||
Typical power consumption (Watts) |
14.0 | 15.0 | 16.0 |
Indicators | |||
LEDs | Power | ||
System Ready | |||
Network Link activity for each ethernet port | |||
Serial: Transmit and Receive data per port | |||
Environmental Specifications | |||
Heat Output (BTU/HR) |
47.77 | 51.18 | 54.59 |
MTBF(hours) | 124,366 | 106,970 | 87,003 |
Calculation model based on MIL-HDBK-217-FN2 @ 30 °C |
|||
Operating Temperature: | 0C to 55C, 32F to 131F | ||
Storage Temperature: | -40C to 85C, -40F to 185F | ||
Humidity: | 5 to 95% (non condensing) for both storage and operation | ||
Case | SECC Zinc plated sheet metal (1 mm) | ||
Ingress Protection rating: | IP30 | ||
Mounting | 1U - 19" rack, front and rear mounting hardware included. DIN Rail mounting kit optional | ||
Product Weight and Dimensions | |||
Weight | 3.0 Kg, 6.6 lbs | 3.1 Kg, 6.8 lbs | 3.2 Kg, 7.0 lbs |
Dimensions | 1U Rack form factor - 26.4 x 43.4 x 4.4 (cm), 10.38 x 17.1 x 1.75 (in) | ||
Packaging | |||
Shipping Dimensions: | 59 x 36 x 9 (cm), 23 x 14 x 3.5 (in) | ||
Shipping weight: | 4.2 Kg, 9.2 lbs | 4.3 Kg, 9.5 lbs | 4.5 Kg, 9.9 lbs |
Regulatory Approvals | |||
Emissions: | FCC Part 15, Subpart B, Class A | ||
CFR47:2003, Chapter 1, Part 15 Subpart B,(USA) Class A | |||
ICES-003, Issue 4, February 2004 (Canada) | |||
CISPR 32:2015/EN 55032:2015 (Class A) | |||
EN55011 (CISPR11) | |||
EN61000-3-2 : 2010, Limits for Harmonic Current Emissions | |||
EN61000-3-3 : 2010, Limits of Voltage Fluctuations and Flicker | |||
Immunity | CISPR 24:2010/EN 55024:2010 | ||
EN61000-4-2: Electrostatic Discharge | |||
EN61000-4-3: RF Electromagnetic Field Modulated | |||
EN61000-4-4: Fast Transients | |||
EN61000-4-5: Surge | |||
EN61000-4-6: RF Continuous Conducted | |||
EN61000-4-8: Power-Frequency Magnetic Field | |||
EN61000-4-11: Voltage Dips and Voltage Interruptions | |||
Safety | UL/EN/IEC 62368-1 CAN/CSA C22.2 No. 62368-1 |
||
IEC 60950-1(ed 2); am1, am2 and EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 |
|||
CAN/CSA-C22.2 No. 60950-1-03 and ANSI/UL 60950-1, First Edition April 1st 2003 (Recognized Component) | |||
Other: | Reach, RoHS and WEEE Compliant Directive 2011/65/EU restriction of the use of certain hazardous substances in electrical and electronic equipment and meets the following standard:: EN 50581:2012 |
||
CCATS - G168387 | |||
ECCN - 5A992 | |||
HTSUS Number: 8517.62.0020 | |||
Perle Limited Lifetime Warranty |
IOLAN RJ45 Serial Connector Pinout | ||||||
---|---|---|---|---|---|---|
|
Pinout | Direction | EIA-232 | EIA-422 | EIA-485 Full Duplex | EIA-485 Half Duplex |
1 | out | RTS | TxD+ | TxD+ | DATA+ | |
2 | out | DTR | ||||
3 | out | TxD | TxD- | TxD- | DATA- | |
4 | GND | GND | GND | GND | ||
5 | GND | GND | GND | GND | ||
6 | in | RxD | RxD+ | RxD+ | ||
7 | in | DSR | ||||
8 | in | CTS | RxD- | RxD- | ||
Optional Perle adapters for use with straight thru CAT5 cabling |
TCP |
---|
Sockets TCP Une connexion par Socket TCP, qui peut être initialisée à partir de l’équipement Série-Ethernet ou de l’hôte/serveur distant. Cela peut se faire soir sur une base point à point, soit sur une base de partage auquel cas un équipement série peut être partagé entre des équipements multiples. Les sessions TCP peuvent être initialisées soit à partir De l’application du serveur TCP ou à partir des adaptateurs série-Ethernet Perle IOLAN. ![]() |
UDP |
Sockets UDP Pour l’utilisation avec des applications UDP, les serveurs Perle IOLAN peuvent convertir les données d ‘équipements série pour le transfert en paquets UDP, en point à point ou en partage entre des équipements multiples. ![]() |
Console Access |
Gestion de Console Pour l’accès aux ports de console distants de routeurs, switches, etc., Les serveurs IOLAN Perle permettent aux administrateurs d’accéder de manière sécurisée aux ports RS232, « in-band » via Reverse Telnet / SSH ou hors bande au moyen de modems numériques. Des modèles Perle IOLAN équipés de modems intégrés sont également disponibles. ![]() |
COM/TTY |
Connecter des Applications Série au moyen d’un Driver de Ports COM/TTY Les Ports Série peuvent être connectés aux serveurs réseaux ou aux stations de travail utilisant le logiciel TruePort de Perle Systems comme un port COM virtuel. Les Sessions peuvent être initialisées soit à partir du serveur Perle IOLAN, soit à partir de TruePort. ![]() |
Tunneling |
Tunneling entre deux équipements Série Le Tunneling en Série vous permet d'établir un lien sur Ethernet vers un port série sur un autre serveur IOLAN. Les deux Ports Série IOLAN doivent être configurés spécifiquement pour le Tunneling en série (Typiquement, un port série est configuré comme serveur du Tunnel tandis que l'autre est configuré en tant que Client du Tunnel) ![]() |
Virtual Modem |
Virtual Modem Virtual Modem permet au serveur IOLAN de Perle de simuler une connexion modem. Une fois connecté au serveur IOLAN, une connexion modem est initialisée, le Serveur IOLAN lance une connexion TCP vers un autre serveur IOLAN configuré avec un port série Modem Virtuel ou vers un hôte utilisant une application TCP P ![]() |